
Tool Center construction tools
steel bending machine steel bending machine plate drilling machine
plaster spraying machine slap machine mortar
dumper truck
Plastering machine and many more

Steelworker category : STEEL REBAR /BENDER/TIEING


new product There is a guarantee and delivery service.
spare parts available Don't be afraid of missing or hard-to-find parts.
Steel Bending Machine : REBAR BENDER

All Videos


Electric Hydraulic Puncher การใช้งานเครื่องเจาะเหล็ก APLUS TOOL Tel.0634510596

REBAR BENDER MARTON เครื่องดัดเหล็ก 25 มม. A+ Tel.0634510596

BAR CUTTER HAPPY TOOL เครื่องตัดเหล็ก 32 มม. แบบแท่น HAPPY TOOL 0634510596

REBAR BENDER HAPPY TOOL เครื่องตัดเหล็ก 25 มม. A+HAPPY TOOL 0634510596

REBAR BENDER HAPPY TOOLการบำรุงรักษาเครื่องตัดเหล็ก 25 มม. A+HAPPY TOOL 0634510596

APlus RB-25 25mm steel bending machine (imported from Taiwan)
Product details
Bending steel bars and deformed bars of size 6-25 mm.
Bending degree 0-180 degrees (counterclockwise)
Motor power 1.6kW Electrical system: 220 V single phase, can be used with general household electricity.
Comes with a power meter
Product size 450 x 500 x 440 mm. Machine weight 91 kg.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and take the dryer to clean the oil drip for maintenance should be checked every month.
Warranty: 6 months warranty except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and the second loss, pay the actual shipping cost, please contact CUSTOMER SERVICE 02-8948847

APlus RB-32 32mm steel bending machine (imported from Taiwan)
Product details
Bending rebar and deformed steel, size 6-32 mm.
bending degree 0-180 degree
Motor power 3 kW, electrical system: 220 V, single phase, can be used with general household electricity.
Comes with a power meter
Product size 600 x 580 x 470 mm. Machine weight 170 kg.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and take the dryer to clean the oil drip for maintenance should be checked every month.
Warranty: 6 months warranty except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and the second loss, pay the actual shipping cost, please contact CUSTOMER SERVICE 02-8948847

MARTON RB-25 PLUS+ Steel Bending Machine 25 new mm
Product details
Bending steel bars and deformed bars size 6-25 mm
Bending control with infrared system (Infrared)
bending degree 0-180 degree
Motor power 3 HP Electrical system: 220 V single phase Can be used with general home lighting
Comes with a power meter
Product size 580 x 553 x 460 mm Machine weight 115 kg.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and take the dryer to clean the oil drip for maintenance should be checked every month.
Warranty: 6 months warranty except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and lose the second time, pay the actual shipping cost. Please contact CUSTOMER SERVICE 02-8948847

MARTON RB-25 Premium Steel Bending Machine 25 new mm
Product details
Bending steel bars and deformed bars size 6-25 mm
Bending control with infrared system (Infrared)
bending degree 0-180 degree
Motor power 3 HP Electrical system: 220 V single phase Can be used with general home lighting
Product size 580 x 553 x 460 mm Machine weight 115 kg.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and take the dryer to clean the oil drip for maintenance should be checked every month.
Warranty: 6 months warranty except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and lose the second time, pay the actual shipping cost. Please contact CUSTOMER SERVICE 02-8948847

MARTON steel bending machine 25 mm.
Product details
Bending rebar size 6-25 mm.
Bending deformed steel, size 6-20 mm.
bending degree 0-180 degree
Product size 450 x 500 x 440 mm.
Motor power 1600 watts Electrical system: 220v. Can be used with general household electricity.
Weight 91 kg
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and take the dryer to clean the oil drip for maintenance should be checked every month.
Warranty: 6 months warranty except motor. The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and the second loss, pay the actual shipping cost, please contact CUSTOMER SERVICE 02-8948847

MARTON steel bending machine 32 mm.
Product details
Bending rebar size 6-32 mm.
Bending deformed steel, size 6-28 mm.
bending degree 0-180 degree
Product size 650 x 580 x 470mm.
Motor power 3000 WATT Electrical system: 220v. Can be used with general household electricity.
Machine weight 175 kg.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and take the dryer to clean the oil drip for maintenance should be checked every month.
Warranty: 6 months warranty except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and lose the second time, pay the actual shipping cost. Please contact CUSTOMER SERVICE 02-8948847

HAPPY TOOL Steel bending machine 25 mm.
Product details
Bending rebar size 6-25 mm.
Bending deformed steel, size 6-25 mm
bending degree 0-180 degree
Product size 450 x 500 x 440 mm.
Motor power 1600 watts Electrical system: 220v. Can be used with general household electricity.
Weight 91 kg
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and take the dryer to clean the oil drip for maintenance should be checked every month.
Warranty: 6 months warranty except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and lose the second time, pay the actual shipping cost. Please contact CUSTOMER SERVICE 02-8948847

HAPPY TOOL Steel bending machine 32 mm.
Product details
Bending rebar size 6-32 mm. Bending 5 steel casings at a time, 6 mm steel at a time, 6 strands at a time.
Bending deformed steel, size 6-32 mm
bending degree 0-180 degree
Product size 750 x 740 x 710 mm.
Motor power 3000 watts Electrical system: 220v. Can be used with general household electricity.
Included in the kit: Wrench, footswitch, roller and sleeve bending roller.
Weight 180 kg
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and take the dryer to clean the oil drip for maintenance should be checked every month.
Warranty: 6 months warranty except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and lose the second time, pay the actual shipping cost. Please contact CUSTOMER SERVICE 02-8948847

HAPPY TOOL Steel Bending Machine 32 mm. 220V. Single Phase
Product details
Bending rebar size 6-32 mm. Bending 5 steel casings at a time, 6 mm steel at a time, 6 strands at a time.
Bending deformed steel, size 6-32 mm.
Bending degree 0-180 degrees, bending speed 5-15 rounds/min.
Motor power 3000 watts Electrical system: 220v. Can be used with general household electricity.
weight 170 kg
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and take the dryer to clean the oil drip for maintenance should be checked every month.
Warranty: 6 months warranty by HAPPY TOOL except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and lose the second time, pay the actual shipping cost.
Please contact CUSTOMER SERVICE 02-8948847

HAPPY TOOL Steel bending machine 32 mm. 380V. 3 Phase
Product details
Bending rebar size 6-32 mm. Bending 5 steel casings at a time, 6 mm steel at a time, 6 strands at a time.
Bending deformed steel, size 6-32 mm
bending degree 0-180 degree
Motor power 1600 watts Electrical system: 380v. 3 Phase, can be used with factory lights. Industrial factory lights.
weight 170 kg
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and take the dryer to clean the oil drip for maintenance should be checked every month.
Warranty: 6 months warranty by HAPPY TOOL except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and lose the second time, pay the actual shipping cost.
Please contact CUSTOMER SERVICE 02-8948847

NIMUT SB-A25 Steel bending machine 25 mm. (1nd hand and 2nd hand)
Product details
Steel bending machine, Nimut, hydraulic system bending degree 0-180 degree
Able to bend rebar or deformed bars of size 6-25 mm. up to SD 50
Available in both types that use electricity 220v. and 380v. 3 Phase with motor damage protection system
Weight 450 kg
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and clean the dryer. Should drop oil for maintenance should be checked every month.
Warranty: 6 months warranty by except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and lose the second time, pay the actual shipping cost.

NIMUT SB-A32 Steel Bending Machine 32 mm. (1st hand and 2nd hand)
Product details
Steel bending platform, Nimut, hydraulic system bending degree 0-180 degree
Able to bend rebar or deformed bars of size 6-32 mm. up to SD 50
Available in both types that use electricity 220v. and 380v. 3 Phase with motor damage protection system
Weight 707 kg
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. You can remove the side cover and clean the dryer. Should drop oil for maintenance should be checked every month.
Warranty: 6 months warranty by except the motor The machine is stolen, dropped, wet, and consumables such as rollers, benders In the event of a breakdown in the first insurance Free delivery in Bangkok and surrounding areas Other provinces and lose the second time, pay the actual shipping cost.
Steel cutting category : BAR CUTTER


BAR CUTTER RC-16 Steel cutter 16 mm
Product details
Electrical system 220 V. Power 690 W
Cuts 4-16 mm. steel.
Cutting speed 2.5-3 seconds
Machine weight 8 kg.
Product size 460 x 270 x 115 mm.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine.
Warranty: 6 months warranty except motor. The machine is stolen, dropped, wet, and consumables such as cutting blades Please contact CUSTOMER SERVICE 02-8948847

BAR CUTTER RC-20 Steel cutter 20 mm.
Product details
Electrical system 220 V. Power 830 W
Cuts 4-16 mm. steel.
Cutting speed 3-3.5 seconds
Machine weight 13 kg.
Product size 410 x 115 x 220mm.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine.
Warranty: 6 months warranty except motor. The machine is stolen, dropped, wet, and consumables such as cutting blades Please contact CUSTOMER SERVICE 02-8948847

BAR CUTTER RC-22 22 mm. steel cutter
Product details
Electrical system 220 V. Power 850 W
Cuts 4-22 mm. steel.
Cutting speed 3-3.5 seconds
Machine weight 15 kg.
Product size 420 x 120 x 230mm.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine.
Warranty: 6 months warranty except motor. The machine is stolen, dropped, wet, and consumables such as cutting blades Please contact CUSTOMER SERVICE 02-8948847

BAR CUTTER RC-25 Steel cutter 25 mm.
Product details
Electrical system 220 V. Power 1600 W
Cuts 4-225 mm. steel.
Cutting speed 5 seconds
Machine weight 24.5 kg.
Product size 480 x 150 x 255 mm.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine.
Warranty: 6 months warranty except motor. The machine is stolen, dropped, wet, and consumables such as cutting blades Please contact CUSTOMER SERVICE 02-8948847

BAR CUTTER RC-32 Steel cutter 32 mm.
Product details
Electrical system 220 V. Power 2900 W
Cut steel size 6-32 mm.
Cutting speed 4-6 seconds
Machine weight 31 kg.
Product size 480 x 150 x 255 mm.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine.
Warranty: 6 months warranty except motor. The machine is stolen, dropped, wet, and consumables such as cutting blades Please contact CUSTOMER SERVICE 02-8948847

BAR CUTTER GQ32 Steel cutting machine 32 mm. 220V.
Product details
Electrical system 220 V. Power 3000 W.
Cut steel size 6-32 mm.
Cutting speed 4-6 seconds
Machine weight 195 kg.
Product size 960 x 200 x 550mm.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. The cutting blade can be switched to use on 4 sides, reducing the cost of consumables, saving labor, finishing work faster.
Warranty: 6 months warranty except motor. The machine is stolen, dropped, wet, and consumables such as cutting blades Please contact CUSTOMER SERVICE 02-8948847

BAR CUTTER GQ32 Steel cutting machine 32 mm. 380V.
Product details
Electrical system 380 V. Power 3000 W.
Cut steel size 6-32 mm.
Cutting speed 4-6 seconds
Machine weight 195 kg.
Product size 960 x 200 x 550mm.
Maintenance:
After every use, the machine should be cleaned. Because there will be iron powder or iron scraps on the bending ball And in the machine, if not cleaned may cause iron powder to rust and shorten the service life of the machine. Therefore, the scrap should be blown out every time both on the machine and inside the machine. The cutting blade can be switched to use 4 sides, reducing the cost of consumables, saving labor, finishing work faster.
Warranty: 6 months warranty except motor. The machine is stolen, dropped, wet, and consumables such as cutting blades Please contact CUSTOMER SERVICE 02-8948847
Metal binder category : REBAR TYING


REBAR TYING MARTON iron binder 8-34 mm.
Product details
battery 12.8 V 4400 mAh Li-Ion
machine weight 1.4 kg. Capacity Manday : 10 points per minute 600 points per 1 hour
Binding Width 8-34 mm. (2 x 4mm Rebar - 2 x 16mm Rebar)
Wire size 0.8 mm. Machine size 255x280x65mm.
can adjust the tightness around 9 levels
Battery charging time 90 minutes, can be tied approximately 3000 times /charging
Maintenance:
Always fully charge the battery before use. Do not pull the plug out before the signal light is full The set includes 1. Tool box 2. 1 iron binder 3. 2 batteries 4. 1 charger stand 5. 2 wire reels
6. 1 wire cutter 7. Wrench
Warranty: 6 months warranty except motor. The machine is stolen, dropped, wet, and consumables such as cutting blades Please contact CUSTOMER SERVICE 02-8948847
Steel drilling machine category : PUNCHER


All Videos

Electric Hydraulic Puncher 20MM.
Hydraulic hole puncher, 20 mm.
Product details
Voltage 220 V Power 900 W
Machine weight 12 kg
Drilling speed 2-3 seconds
The smallest hole size is 6 mm. The maximum hole size is 20 mm.
Machine size 500x195x100 mm
CE ROHS standard
Care and use:
hole stamping machine Hydraulic punching machine is used for steel plate punching, copper plate punching, bus bar punching. , stainless steel Works well for drilling, angle iron, sheet steel, wifrack steel. Copper busbar. The highlight is that the machine is lightweight. Easy to move, quiet operation, no sparks, can use a single machine. Do not connect to the hydraulic pump. The operation is simple, just connect to 220 V electricity and press the button to clean and dust. Steel scraps on the drill head after every use
Warranty: 6 months warranty except motor. The machine was stolen, dropped, wet, and consumable. normal use except coal plot and drill head Please contact CUSTOMER SERVICE 02-8948847

Electric Hydraulic Puncher
Hydraulic hole puncher, 25 mm.
Product details
Voltage 220 V Power 900 W
No. 24.5 kg
Drilling speed 4-5 seconds
Maximum drilled hole size 25 mm
The smallest hole size is 6 mm.
Max. Throat Depth45 mm
The thickness of the drilled steel is 10 mm.
Machine size 500x195x100 mm.
CE ROHS standard
Care and use:
hole stamping machine Hydraulic punching machine is used for steel plate punching, copper plate punching, bus bar punching. , stainless steel Works well for drilling, angle iron, sheet steel, wifrack steel. Copper busbar. The highlight is that the machine is lightweight. Easy to move, quiet operation, no sparks, can use a single machine. Do not connect to the hydraulic pump. The operation is simple, just connect to 220 V electricity and press the button to clean and dust. Steel scraps on the drill head after every use
Warranty: 6 months warranty except motor. The machine was stolen, dropped, wet, and consumable. normal use except coal plot and drill head Please contact CUSTOMER SERVICE 02-8948847
Masonry Tools Category : Concrete Tools
